Shopping cart

**ALL PRICES NOW INCLUDE VAT**
0 Items £0.00



Wetroomsi
Mapei
LTP Cleaners

Dilex-EF and EKE

Schlüter®-DILEX-EKE and Schlüter®- DILEX-EF are single-part corner profiles for interior wall corners. If the floor covering is not constructed as a floating screed, Schlüter®-DILEX-EKE and Schlüter®- DILEX-EF may also be used as flexible floor/ wall transitions.
The trapezoid perforated, lateral anchoring legs are firmly embedded in the adhesive below the tile covering. In the case of Schlüter®-DILEX-EKE, one of the anchoring legs forms a chamber for inserting cut tile edges. In the case of Schlüter®- DILEX-EF, the tiles abut the profile from both sides, leaving a uniform joint space. The tile surface can be either flush with the profile edge or up to approx. 2 mm lower, which allows for choosing a variety of tile thicknesses. Completely fill the joint between the profile and the tiles with grout (or partly with tile adhesive during installation).The visible movement zone is only 5 mm wide. It must be verified for individual projects whether this 5 mm zone is sufficient for the expected movements.

Schlüter®-DILEX-EKE and Schlüter®- DILEX-EF are single-part corner profiles for interior wall corners. If the floor covering is not constructed as a floating screed, Schlüter®-DILEX-EKE and Schlüter®- DILEX-EF may also be used as flexible floor/ wall transitions.
The trapezoid perforated, lateral anchoring legs are firmly embedded in the adhesive below the tile covering. In the case of Schlüter®-DILEX-EKE, one of the anchoring legs forms a chamber for inserting cut tile edges. In the case of Schlüter®- DILEX-EF, the tiles abut the profile from both sides, leaving a uniform joint space. The tile surface can be either flush with the profile edge or up to approx. 2 mm lower, which allows for choosing a variety of tile thicknesses. Completely fill the joint between the profile and the tiles with grout (or partly with tile adhesive during installation).The visible movement zone is only 5 mm wide. It must be verified for individual projects whether this 5 mm zone is sufficient for the expected movements.