Shopping cart

**ALL PRICES NOW INCLUDE VAT**
0 Items £0.00



Wetroomsi
Mapei
LTP Cleaners

Movement and control joint profiles

The profiles of the Schluter Dilex series offer maintenance free and functional solutions for all relevant movement joints in Tile coverings. All profiles are installed at the same time as the tile covering.
Due to the wide variety of movement profiles available, please refer to the Schluter catalogue for detailed application information and then contact us at Lilley Tile and Stone for free technical support to ensure the correct solution to your project.

The profiles of the Schluter Dilex series offer maintenance free and functional solutions for all relevant movement joints in Tile coverings. All profiles are installed at the same time as the tile covering.
Due to the wide variety of movement profiles available, please refer to the Schluter catalogue for detailed application information and then contact us at Lilley Tile and Stone for free technical support to ensure the correct solution to your project.

Dilex-AHK

Schluter-DILEX-AHK/-PHK prevents surface water penetration and meets the maintenance and hygienic requirements of...

Dilex-AKWS

Schluter-DILEX-AKWS is a prefabricated, maintenance-free surface movement joint profile. It features trapezoid-...

Dilex-AS

Schlüter-DILEX-AS is a pre-fabricated two part profile for the flexible connection of tiled surfaces to building...

Dilex-BT BTO BTS BT-MT

Schlüter-DILEX-BT is a maintenance free, structural expansion joint profile made of aluminium. The profile is...

Key Points: Idea for absorbtion of three-dimensional movement.
Dilex-BWA

Schlüter®-DILEX-BWA is a movement profile used in tile installations to provide a flexible connection to the...

Dilex-BWB

Schlüter®-DILEX-BWB is a pre-fabricated movement profile for tiled coverings. The perforated anchoring legs, made of...

Dilex-BWS

Schlüter®-DILEX-BWS is a pre-fabricated movement profile for tiled coverings. The perforated anchoring legs, made of...

Dilex-DFP

Schlüter®-DILEX-DFP is a movement joint profile to be installed at door areas or used to divide screed areas.

Dilex-EDP

Schlüter®-DILEX-EDP is a maintenance-free, stainless steel movement profile for absorbing horizontal movement. The...

Dilex-EF and EKE

Schlüter®-DILEX-EKE and Schlüter®- DILEX-EF are single-part corner profiles for interior wall corners. If the floor...

Dilex-EHK

Schluter-DILEX-EHK and EBHK features trapezoid-perforated anchoring legs, made of stainless steel, which are secured...

Key Points: For high hygienic requirements.
Dilex-EK

Schlüter®-DILEX-EK is a two part profile made of rigid/soft plastic with a tongue and groove connection and an...

Dilex-EKSB

Schlüter®-DILEX-EKSB is a movement profile with edge protection for floor coatings and other thin floor coverings....

Dilex-EMP

Schlüter-DILEX-EMP is a maintenance free, stainless steel movement profile for absorbing horizontal movement. The...

Dilex-EP

Schlüter®-DILEX-EP is a prefabricated movement profile for the installation of bonded screeds or screeds over a...

Dilex-EZ-6 and 9

Schlüter®-DILEX-EZ 6/9 is a special profile that combines decorative design with stress relieving function, suitable...

Dilex-EZ70

Schlüter-DILEX-EZ 70, a profile made of rigid and soft PVC, is used for creating movement joints in coverings set in...

Dilex-HK

Schlüter®-DILEX-HK is a cove shaped movement profile for corner joints within wall/floor transitions that meets the...

Dilex-HKS

Schlüter®-DILEX-HKS, like Schlüter®- DILEX-EHK, is a cove shaped stainless steel profile, which also features a...

Dilex-HKU

Schlüter®-DILEX-HKU is a cove shaped profile entirely made of stainless steel for internal wall corners and floor...

Pages

Please note: Before any Schluter product can be shipped, under an agreement with Schluter we are obliged to call you to ensure you receive full technical support on the product you wish to purchase.