Schluter Trep-G-B Transparent T (Brushed Stainless Steel V2A) Wide 55mm R11 L=1Mtr
Schlüter®-TREP-G and -GL are stainless steel stair nosing profiles with a special non slip tread. (R11 slip resistance rating as according to DIN 51 130 - Datasheet attached)
The profiles are suitable for the safe and visually appealing design of stairs with tiled or natural stone coverings, but can also be used with screed or other coating materials.
Schlüter®-TREP-G with a special non slip tread (classification R11) made of a coloured mineral grain tape is particularly suitable for applications in areas with heavy foot traffic e.g. business premises or in public buildings. Schlüter®-TREP-GL with a special non slip tread (classification R10) made of profiled plastic insert is suitable for residential settings or areas with low foot traffic.
Schlüter®-TREP-GK and -GLK are variants without anchoring legs. These profiles are adhered to existing steps, e.g. for subsequent installation over damaged edges, eliminating the need to replace the entire step. Schlüter®-TREP-G /-GL protects the front edge of steps and adds a high degree of safety due to the special non slip design of the tread and the excellent visibility of the steps. The non slip treads are adhered to an indentation in the support profile to ensure that the edges of the adhesive tape are reliably protected. The treads of Schlüter®-TREP-G/-GL can be subsequently replaced in case of damage or wear and tear. Matching end caps are available.