ARDEX A35 rapid drying cement for internal floor screeds.
Coverage:
1:4 mix Approx 0.37kg per m2 per millimetre of thickness
1:5 mix Approx 0.31kg per m2 per millimetre of thickness
USE
ARDEX A 35 is used to produce bonded, unbonded and floating screeds for internal locations.
It can also be used for large repairs to existing cement/sand screeds. It is ideal for situations where early foot traffic and rapid hardening is required
ARDEX A 35 achieves rapid strengthening and will pass a BRE Screed (ISCR) Test after just 6 hours.
After a day, it will also exceed the acceptable minimum compressive and tensile bending strengths attained by ordinary cement screeds after 28 days.
APPLICATION
The working time of the mixed mortar is approximately 1 hour at 20°C, therefore mixing, placing, compaction and trowelling off must proceed without delay.
The amount of mortar mixed and the area to be screeded should be limited so that trowelling off and finishing can be completed within this time
Colour | N/A |
---|---|
Power Options | N/A |
Product Code | 18295-p |
Manufacturer | Ardex |