High performance flexible rapid setting, 2 part levelling and smoothing compound
Mixing:
LevelMore Pro powder must only be mixed with LevelMore Pro liquid at a ratio of 20kg powder to 4.5 litres of liquid.
Application:
LevelMore Pro can be applied at a thickness of 2mm to 20mm in a single application.
Pour the mixed compound onto the prepared floor before using a trowel or rake to regulate the thickness and guide the product into the desired areas.
Whilst the product is still wet, the use of a *spiked roller can further enhance the surface finish by removing any trapped air.
The use of a spiked roller is only recommended when the product has been applied at a thickness that will allow the roller to freely roll through the compound.
Suitable Floor Backgrounds:
Cement and sand screed (inc heated)
Concrete
Asphalt (flooring grade)
Epoxy DPM
Existing tiles and natural stone on solid bases
Calciun sulphate / Anhydrite screed (inc heated)
Plywood overlay (class 3)
Metal (steel)
Please see data sheet attached for more information
Manufacturer | Kelmore |
---|---|
Select Colour | N/A |
Product Code | E0024-p |