Do not use On surfaces that are not resistant to basic agents. On marble and natural stone it is advisable to carry out a test in advance.
Preparation of substrates The coating materials must first be cleaned to remove any dust. Grout must be fully hardened. Preparation Fuga-Shock Eco is a ready-to-use transparent liquid. Shake the bottle well before opening in order to redisperse the liquid evenly. Application It is advisable to perform a preliminary test on tiles that are not to be laid, or in a concealed area. Apply Fuga-Shock Eco evenly to the surface to be cleaned with a white rough scrubbing pad and leave it until the dirt to be removed begins to visibly lift; this may take a few minutes or up to 3 – 5 minutes depending on the quantity, the elapsed time after laying (at least 7 days) and the degree of absorption of the surface. Scrape the surface mechanically with abrasive felt pads. Once cleaned, rinse well and dry carefully. The use of wet vacuum makes the operation easier and ensures the complete removal of residue. In the case of large surface areas, a mechanical buffer with an abrasive felt pad for the removing operation is recommended. Repeat for highly stubborn dirt. Cleaning Residues of Fuga-Shock Eco can be cleaned from tools by rinsing them thoroughly with water.