LTP Blackstone Sealer and Restorer (Select Size)
As low as
£7.16
- Water based
- Impregnating sealer
- Restores faded stone
- Exterior use
- Coverage aprrox per litre:
Lower porosity surfaces 15m²
Higher porosity surfaces 7.5m²
Polished surfaces 30m²
Availability:
In stock
Product Code
LTP-Blackstone
For restoring the appearance of all types of faded dark natural and artificial stone including limestone, marble, slate and concrete pavers.
Ensure surface to be treated is completely clean,dry, and free from dirt, grime, cement, and grout.
If necessary, first wash surfaces with a dilute solution of LTP Grimex 1:5 and scrub with a white nylon pad. Rinse well to remove residues and leave to dry
Preparation of older surfaces:
Remove blackspot, algae,mildew and stains from detritus use LTP Blackspot & Algae Remover. Apply to surfaces undiluted and leave for up 5 hours. Rinse and leave to dry.
Application:
Wear gloves and ensure that any surfaces not to be treated are covered and protected.
Shake bottle well before use. Work in manageable areas at a time as far as you can reach without stepping into the solution.
Apply a small amount to the surface and spread out evenly using a sealant applicator, foam roller or paint brush. Allow to penetrate the stone. If a second coat is required apply immediately after the first has absorbed. Do not allow the first coat to fully dry before application.
Do not walk on the surface for at least 4 hours after the final application.
.Once dry and to help ensure an even application it may be necessary to work off any visible excess using a dry towel.
Allow newly treated surfaces to cure for 24 hours. If necessary, wash surfaces with a 1 : 10 dilute solution of LTP Powerstripper. This will help to remove any excess that is difficult to rub off.
Before allowing traffic gently rub the surface in a few areas with white cloth or paper towel to make sure that it is colourfast.
Do not use when surfaces are very cold or very hot. Ideally between 5 - 25°C.
IMPORTANT:
This product is a permanent staining solution that will darken the surface of the stone and the grout joints making it very difficult to remove once applied.
Always test on a small area before general application to help establish best method and optimum number of coats required.
Do not walk on treated surfaces until the solution has completely dried.
| Product Code | LTP-Blackstone |
|---|---|
| Manufacturer | LTP |
Check items to add to the cart or
IMPORTANT DELIVERY INFO
If delivery is not for UK Mainland (This includes the Highlands), then you must contact us before ordering!
UK Mainland Deliveries (Not Highlands)- Free shipping on pallet orders!!! *Does not Include Ditra
- Delivery Charges from £7.50 weight/size/value dependant
- Note: 12:30pm cut off for next and 2 working day delivery.
- We do not ship on Weekends.
- You MUST Contact us ref any Access Restrictions. Please see Terms & Conditions for costs associated with failed delivery.
VAT INCLUDED
All Prices Listed Include VAT. This is broken down during checkout and on your emailed invoice.
PRODUCT SUPPORT
Via email or phone, Monday to Friday 8am to 5pm.
