LTP Mattstone (5 Litre)

LTP Mattstone Impregnating Matt Sealer (Select Size)

LTP Colour Intensifier (5 Litre)

LTP Colour Intensifier and Stainblock (Select Size)

LTP Mattstone H20 Natural Finish Sealer (Select Size)

As low as £18.61
  • Water based impregnating sealer.
  • Enviromentally safer & low odour.
  • For interior & exterior use.
  • Coverage aprrox per litre per coat:
    Lower porosity surfaces 15m²
    Higher porosity surfaces 7.5m²
    Polished surfaces 30m²
Availability: In stock
Product Code
LTP/28/select
  • Water based impregnating sealer for interior & exterior use.
    Low odour
    For all types of natural and artificial stone, quarry, brick, concrete & paving. Honed, rough cut and polished surfaces
    A natural finish that delicately enhances colour. Helps protect against staining. Strongly repels water, oil and grease.
    Allows surface to breathe.
    Preparation:
    Ensure surface to be treated is completely clean, dry and free from dirt, grime, cement and grout. If necessary, first wash surfaces with a dilute solution of LTP Grimex 1:10 Rinse well to remove residues and leave to dry (24hrs)
    Rough cut, tumbled, textured or riven surfaces
    Shake bottle before use. Apply generously and evenly using a paint brush or sponge. On highly absorbent surfaces apply further coats at hourly intervals until the surface is fully saturated. After 1 hour remove any excess sealer with an absorbent towel. Do not allow residues to dry on the surface.
    Honed, smooth and polished surfaces
    Shake bottle before use. Apply generously and evenly using a lint free cloth, lambswool applicator, paint brush or sponge. Leave surfaces to dry. Remove any residual sealer after 1 hour by rubbing with a dry microfibre cloth. On vertical surfaces apply from the bottom up.
  • More Information
    Product Code LTP/28/select
    Manufacturer LTP
    pdf
    (Size: 213.1 KB)