LTP Stoneseal (250ml Aerosol)

LTP Stoneseal (250ml Aerosol)

LTP Mattstone H20 (5 Litre)

LTP Mattstone H20 Natural Finish Sealer (Select Size)

LTP Mattstone Impregnating Matt Sealer (Select Size)

As low as £11.25
  • Natural matt finish impregnating sealer
  • Strongly repels water, oil and grease
  • Allows surfaces to breathe.
  • Minimal change to the natural appearance.
  • Coverage Approx Per 10m2:
    Lower porosity floors 1-2 litres
    Higher porosity floors 3-4 litres
Availability: In stock
Product Code
LTP/12
  • Natural finish impregnating sealer for interior & exterior use
    Suitable for all types of natural and artificial stone, unglazed porcelain, sandstone, slate, marble, terracotta, quarry, brick & concrete.
    Directions for use:
    Shake the bottle prior to use.
    Ensure surface to be treated is completely clean and dry. Apply with a soft cloth, brush or sealant applicator pad allowing at least two hours between coats.
    More absorbent floors may require further coats and on such floors the product should be generously applied.
    After one hour rub over the surface with a soft fluff free cloth or buffing machine to obtain a uniform finish and remove any excess sealer.
    This product will dry after about two hours, but will take a further three days to become fully resistant.
    N.B:
    Use in well ventilated areas. Do not use in temperatures under 5°C or over 25°C. Following application keep the area dry for a minimum of three days
    Always test first on an inconspicuous area, prior to general application.
  • More Information
    Product Code LTP/12
    Manufacturer LTP
    pdf
    (Size: 330.9 KB)