Mapeguard WP Adhesive 6.65kg
Mapeguard WP Adhesive
Two-component, rapid-drying elastic cementitious adhesive for bonding and sealing overlaps of Mapeguard WP 200 , sealing band internal and external corner pieces and pipe collars.
Unit of 6.65 kg
5 cm overlap on Mapeguard WP Adhesive around 100 g/m. 12 cm overlap on Mapeguard WP Adhesive around 250 g/m.
For walls and floors.
Mapeguard System Alkali-resistant, waterproofing and anti-fracture membrane under ceramics, natural stone tiles and LVT WHERE TO USE Waterproofing and anti-fracture membrane, made of soft polyethylene, for direct application under ceramics, natural stone tiles and LVT (Luxury Vynil Tiles). Some application examples • Mapeguard WP 200 is a waterproofing and antifracture membrane used in wet and damp areas in residential and commercial buildings such as domestic and hotel bathrooms, private or commercial showers. • Waterproofing membrane on moisture-sensitive substrates (such as gypsum plasters and gypsum fiber boards, calcium sulphate screeds) and mineral surfaces (such as cement plaster, porous concrete, concrete, cement screed, cement-based panels). TECHNICAL CHARACTERISTICS Mapeguard WP 200 is a flexible, thin-layer, waterproof isolating sheet of polyethylene, coated on both sides with a non-woven polypropylene fabric. The non-woven fabric ensures a relevant bond strength of the adhesive between the membrane and the substrate and between the membrane and the covering. Properties • Waterproofing. • High tensile strength. • High tensile bond strength adhesive connection with tile adhesives. • Crack-bridging ability. • Alkali-resistant.