Adesilex G19 Beige 10kg

Mapei Adesilex G19 PVC and Rubber Flooring Adhesive (Select Size)

Adesilex G20 Beige

Mapei Adesilex G20 Resilient and Textile Adhesive (Select Size)

Mapei Adesilex G19 Rubber PVC and Conductive Flooring 10 kg

Two-component epoxy-polyurethane adhesive for rubber and PVC conductive flooring.

Some application examples

Adesilex G19 Conductive can be used for bonding:

• conductive and static-dissipative rubber flooring;

• conductive and static-dissipative PVC flooring;

• linoleum in all areas where the discharge of static electricity could cause explosions or disturb electrical and electronic equipment, e.g. operating rooms, chemical laboratories and factories, areas containing electronic instruments, data processing centres, etc.

ON all substrates generally used in building including substrates that are non-absorbent and sensitive to moisture.

Colour when mixed: Black

Consumption
0.3-0.45 kg/m2.

£133.41
Availability: In stock
SKU
130111

Two-component epoxy-polyurethane adhesive for rubber and PVC conductive flooring.

WHERE TO USE

Bonding of rubber and PVC conductive flooring and relevant copper strips. Some application examples Adesilex G19 Conductive can be used for bonding: • conductive and static-dissipative rubber flooring; • conductive and static-dissipative PVC flooring; • linoleum in all areas where the discharge of static electricity could cause explosions or disturb electrical and electronic equipment, e.g. operating rooms, chemical laboratories and factories, areas containing electronic instruments, data processing centres, etc. ON all substrates generally used in building including substrates that are non-absorbent and sensitive to moisture.

TECHNICAL CHARACTERISTICS Adesilex G19 Conductive is a two-component adhesive composed of an epoxy-polyurethane polymer with special conductive fillers (component A) and a special hardener (component B). When mixed together accurately they form a blackcoloured paste that is easy to apply with a notched trowel. Adesilex G19 Conductive hardens solely through chemical reaction and without shrinkage and is flexible, resistant to humidity, water, heat and atmospheric agents. It bonds strongly to all materials commonly used in construction.

RECOMMENDATIONS

• Do not use on substrates subject to rising damp (always insert a vapour barrier between the ground and the underlying screed). • Do not use on damp concrete (residual moisture content should not be higher than 2.5-3%). • Do not use on fresh asphalt (wait at least 20 days). • Do not use on bituminous surfaces that may bleed oils. • Do not use at temperatures below +10°C or above +30°C. • Do not use on curved surfaces or on steps if the covering does not maintain perfect contact with the substrate until setting has occurred (use Adesilex VZ Conductive, polychloroprenic conductive contact adhesive).

More Information
Colour Black
SKU 130111
Brand Mapei

File Downloads

Write Your Own Review
You're reviewing:Mapei Adesilex G19 Rubber PVC and Conductive Flooring 10 kg
Your Rating