Mapei Dursilite Interior Washable Matt Wall Paint 5kg (Select RAL Colour) – Special Order
Dursilite Washable water based paint for internal walls
Over 10,000 colours Matt Finish
Available in all RAL, NCS & Mapei Colour Map. Delivery approx 5 Working Days. Please See full description concerning terms of custom made product.
* Special Order: Please note, this product is custom made to your order on a 5 day delivery service. We strongly recommend you double check your colour before ordering as this product is non returnable. Products damaged during delivery will be replaced with the product you originally ordered.
WHERE TO USE For painting all types of new, old and painted internal surfaces where an attractive finish with a smooth, velvety, matt surface is required.
The product has low dirt pick-up and a high whiteness level.
To paint partially-covered external surfaces protected against direct sunlight and rain.
The product’s special formulation makes it particularly suitable for painting all types of cementitious, lime and gypsum substrates which require a high degree of longlasting protection and excellent permeability to water vapour which are easy to clean.
Some application examples • Painting all types of internal walls and new, well-cured or old cementitious, lime and gypsum render and smoothing and levelling compounds, as long as they are reg
TECHNICAL CHARACTERISTICS Dursilite is a modified acryl resin-based washable matt paint in water dispersion with selected charges with good covering properties and a high whiteness level for internal walls. When applied on internal surfaces, Dursilite bonds perfectly to all types of masonry, render, smoothing and levelling compounds and old paintwork, as long as it is well attached and is not crumbling. Dursilite protects the substrate and gives it a highly attractive, uniform matt finish which is velvety to the touch. Dursilite is available in a wide range of colours, created using the ColorMap® automatic colouring system.
APPLICATION PROCEDURE Preparation of the substrate Surfaces must be well cured, perfectly clean, sound and dry. Remove all traces of oil and grease from the surface and any parts which are not well attached. Seal all cracks and repair areas which are deteriorated. Seal the porosity and smooth over uneven areas on the substrate with mortars and skimming compounds from the MAPEI Building line. Apply Malech primer. Dilute Malech with water according to the type of substrate (cementitious, gypsum or lime based); as a general rule, it is suggested a diluition Malech/water in a ratio of 1/1 for more absorbent substrates and 1/2 for less absorbent substrates, in order to avoid the forming of a glassy film on the wall surface. Wait until Malech primer is completely dry (6-12 hours) and apply Dursilite.