Mapegrip D2 15 kg

Mapei Ultralite D2 Ready Mix Wall Tile Adhesive Pallet 48 Tubs

Keraquick Grey 10 kg

Mapei Keraquick XL Fibrelite Grey For Large Format Tiles - Pallet 48x15 kg

Mapei Keraquick XL Fibrelite White For Large Format Tiles - Pallet 48x15 kg

£1,571.62

Fibre reinforced high yield flexible rapid setting adhesive for interior and exterior use.

Ideal for porcelain, ceramic and natural stone materials

Some application examples for this are:

CONSUMPTION
6-8 m² depending on bed depth per bag

  • Fixing tiles up to 1500mm x 1500mm
  • Installation onto suitably prepared timber substrates
  • Suitable for large commercial environments
  • Suitable for installation over wet and electrical underfloor heating systems
  • Suitable for installation of tile on prepared calcium sulphate screeds (anhydrite)
Availability: In stock
Product Code
0125715-pallet

WHERE TO USE

Interior and exterior bonding of ceramic and porcelain tiles and mosaics and natural stone materials that are not sensitive to moisture. Ideal for large format tiling. Some application examples

• Fixing tiles up to 1500 x 1500 mm in size.

• Installation on to suitably prepared timber substrates such as 15mm overlaid plywood floors.

• Suitable for use in large commercial environments.

• Suitable for internal and external use.

• Installing marble and natural stone materials.

• Suitable for installation over wet and electrical underfloor heating systems.

• Suitable for installation of tile on prepared calcium sulphate screeds (anhydrite).

TECHNICAL CHARACTERISTICS Keraquick XL Fibrelite is a powder composed of a mixture of special cements, selectively graded aggregates, synthetic resins, fibres and setting accelerators that develop a high bond strength only 90 minutes after setting. For this reason floor installations can be completed very quickly. Floors can be walked on after only 90 minutes and are ready for general foot traffic after 12 hours. When hardened Keraquick XL Fibrelite is frost and water resistant.

RECOMMENDATIONS

• Anhydrite screeds must be abraded, vacuumed and primed with Mapei Eco Prim T diluted 1:2 with water, or Primer G.

• Plywood overlaid floors must use a minimum 15 mm exterior grade plywood and be fixed at minimum 300 mm centres in all directions to provide a rigid substrate. Prime with Eco Prim Grip.

More Information
Colour White
Product Code 0125715-pallet
Manufacturer Mapei
pdf
(Size: 157.2 KB)