Two-part, fast-setting, smoothing, levelling compound
Latexplan No Ammonia is suitable for levelling differences in thickness between 3mm to 10mm on new and existing substrates.
It can be used over most existing adhesive residues, including bitumen.
Also suitable for use over plywood substrates and MAPEI surface applied DPMs in most cases without priming.
Accepts subsequent floor coverings in 4 hours.
In most cases, priming is not required.
Suitable for use with underfloor heating.
Moisture tolerant; can be applied below surface applied damp proof membranes
Application:
The mixed product is poured onto the prepared sub-floor and spread with a smooth edged trowel to the required thickness in one operation.
Additionally the use of a spiked aeration roller will ensure a smooth even finish that will not require any further attention prior to the floor coverings being installed.
Latexplan No Ammonia can be applied from featheredge to 10mm, although a minimum 3mm thickness is recommended to provide the optimum absorption for the adhesive.
Apply at a minimum floor temperature of +5 C or above
Colour | N/A |
---|---|
Power Options | 30W (27W max) |
Product Code | 2371124-2371224-p |
Manufacturer | Mapei |