Mapei Mapefloor Finish 52W Transparent Natural Coat 5.4kg

Where to use
Mapefloor Finish 52 W is specially formulated to form a transparent, opaque, wear-resistant protective finishing coat on epoxy products, such as Mapefloor I 300 SL and Mapefloor I 500 W.
Particularly suitable as a primer for Mapefloor Finish 58 W on cementitious systems such as Ultratop, Ultratop Living and Ultratop Loft and as a dust and oil repellent treatment for concrete and natural-finish concrete floors, without leaving the surface with a “wet-look” finish.
Applied on cementitious substrates it may also be used for protecting concrete structures subject to light attack by chemical agents.
Application examples
Transparent finishing coat on resin floors
Primer for Mapefloor Finish 58 W
Dust-repellent treatment for new and old industrial concrete floors subjected to light traffic.
Transparent protective layer for concrete structures subject to light chemical attack.
Technical characteristics
Mapefloor Finish 52 W is a solvent-free, two-component, low-yellowing polyurethane finishing product in water dispersion.
Once dry it does not significantly modify the colour of the surface treated. This characteristic is particularly advantageous when the original appearance of the surface to be treated needs to remain unchanged.
Mapefloor Finish 52 W is applied using a roller or the airless spray system, at a thickness of 60 to 100 microns.
When applied on absorbent cementitious substrates, Mapefloor Finish 52 W is used to even out the absorbency of the surface before applying the final treatment of Mapefloor Finish 58 W.