Mapei Mapegum WPS Paint On Waterproofing Membrane (See Options)

Application:
To guarantee continuity in the waterproofing coat, we recommend placing a rubber tape such as Mapeband,Mapeband PE 120 or Mapeband Easy to form elastic joints between the wall and the floor and between contiguous walls before applying Mapegum WPS
Mapeband, Mapeband PE 120 or Mapeband Easy must be bonded to the substrate using Mapegum WPS
Mapegum WPS may be applied by trowel, with a roller, by brush or spray (if required, dilute with up to 5% of water)
The product must be applied evenly in thin coats
Wait until the first coat is dry before applying further coats crossways (1-2 hours according to temperature conditions)
The final thickness of Mapegum WPS should not be less than 0.8 mm (equivalent to a dry thickness of 0.5 mm), in order to form a consistent, flexible continuous coat.
Make sure that there are no gaps caused by imperfections in the substrate