Mapei Topcem Fast Drying Screed Binder Pallet (40x20Kg)

WHERE TO USE Formation of bonded, unbonded and floating screeds on both existing and new concrete prior to the installation of wood, PVC, linoleum, ceramic tiles, natural stone, carpet or any other flooring where rapid drying is required for short installation times. Suitable for indoor and outdoor use.
Uses:
High traffic areas such as airports, shopping centres, schools, hospitals etc.
Fast track construction where the screed needs to be trafficked or overlaid early.
Suitable for thin resin or cementitious systems such as Mapefloor or Ultratop.
Suitable for use where BRE screed test category A or B is required
Underfloor Heating:
Where underfloor heating pipes are incorporated, they should be located a minimum of 25 mm below the surface of the screed.
Additionally reinforcing mesh if used, should be placed over the pipes.
The underfloor heating may be commissioned after 4 days.
Note: For under floor heating systems the screed must contain either additional reinforcing mesh or Mapefibre NS12 fibres.