Mapelastic Smart Kit (20Kg Bag + 10kg Drum)

Mapei Mapelastic Smart Kit Waterproof Membrane Pallet 40x (20Kg Bag + 10kg Drum)

Mapei Ultrabond Eco S9551K Solid Wood Adhesive 48 x 15Kg Tubs

Mapei Ultrabond Eco S9551K Solid Wood Adhesive 48 x 15Kg Tubs

Mapelastic Foundation Kit Pallet 40x (22Kg Bag +10kg Drum)

£5,640.50

A two-component flexible cementitious mortar for waterproofing concrete and masonry surfaces subject to negative and positive hydraulic pressure.

COVERAGE: approx. 1.65 kg/m2 per mm of thickness.

Part A: 22kg Bag Part B: 10kg Drum

Availability: In stock
Product Code
168322-168410 pallet

WHERE TO USE Waterproofing concrete and masonry structures subject to positive or negative hydrostatic pressure. It is recommended for foundation walls, car-parks and underground environments, basins, channels and swimming pools.

Some application examples • Waterproofing concrete retaining walls. • Waterproofing underground car-parks, cellars, sunken swimming pools and basins and lift pits against the counter-pressure of water. • Waterproofing breeze-block walls pre-treated with a suitable MAPEI mortar.

TECHNICAL CHARACTERISTICS Mapelastic Foundation is a two-component mortar based on cementitious binders, fine-grained selected inert materials, special additives and synthetic polymers in water dispersion, blended according to a formula developed in MAPEI’s own Research & Development laboratories. When the two components are mixed together, a plastic consistency is obtained. It may be applied with a roller or by spray on both horizontal and vertical surfaces, at a thickness of at least 2 mm. Thanks to the high content and quality of the synthetic resins, the hardened layer of Mapelastic Foundation is highly flexible and remains stable under all environmental conditions. When mixed, the product is highly thixotropic, which reduces waste to a minimum during the application phase with a roller. Mapelastic Foundation is completely waterproof against positive pressure, and is waterproof against negative pressure of up to 1.5 atm (15 m column of water). Once cured, it is resistant to soluble salts which are present in sea water or in the ground, such as chlorides and sulphates. Mapelastic Foundation also has excellent bonding strength on all cementitious substrates if they have been suitably prepared. All these properties keep structures protected and waterproofed with Mapelastic Foundation perfectly dry over the years. Mapelastic Foundation fulfils all the main criteria for the EN 1504-9 Standards (“Products and systems for the protection and repair of concrete structures: definitions, requirements, quality control and conformity assessment. General principles for the use of products and systems”) and the requirements for EN 1504-2 Standards according to PI-MC-IR principles (“Protection systems for concrete surfaces”). Product certified EC1 R Plus by the GEV Institute (Gemeinschaft Emissions-kontrollierte Verlegewerkstoffe, e.V.) as a product with very low emission of volatile organic compounds.

More Information
Product Code 168322-168410 pallet
Manufacturer Mapei