Mapesil AC 999 Transparent 310 ML

Kerakoll Keralevel Eco LR Leveling Product 25kg (Select Quantity)

No More Ply Mega Strength Waterproof Adhesive 310ml

No More Ply Mega Strength Waterproof Adhesive 310ml

No More Ply Pre-Primed Tile Backer Boards (1200x600x6mm) Pallet of 150 sheets

6mm Pre-Primed NoMorePly strengthens timber floors before tiling.

They prevent tiles and grout lines cracking by removing the ‘flex’ in timber floors caused by footfall.

Slim 6mm boards provide the same strength as 15mm plywood.

Water resistant and A1 fire rated

Fix with Mega strength and 25mm screws also available

£1,073.93
Availability: In stock
SKU
nmp1200x600x6mm-pallet150

6mm Pre-Primed NoMorePly strengthens timber floors before tiling. They prevent tiles and grout lines cracking by removing the ‘flex’ in timber floors caused by footfall. Slim 6mm boards provide the same strength as 15mm plywood. Water resistant and A1 fire rated Fix with Mega strength and 25mm screws also available

Over Boarding Timber Floors

Step 1 First prepare the site. Remove all old existing floor coverings, screw down any loose floorboards (timber or chipboard) firmly and sweep clean. boarding.

Step 2 Run two  beads of Mega Strength Adhesive onto the back of the boardt. Lay in position and screw down using 25mm No More Ply screws, 8 screws per sheet is usually enough. Always stagger the joints. 

Step 3 Run a  bead of Mega Strength Adhesive between each board, this will help to seal and reinforce the joints.

Mega Strength Polyurethane Adhesive is a very strong waterproof glue so always wear gloves and wipe off any excess glue quickly with an old cloth. 

 For straight cuts score with the No More Ply Scoring Knife and snap the board across a length of timber or other hard ridge or use an appropriate blade in a jigsaw or angle grinder. 


More Information
Colour Grey
SKU nmp1200x600x6mm-pallet150
Brand No More Ply
Write Your Own Review
You're reviewing:No More Ply Pre-Primed Tile Backer Boards (1200x600x6mm) Pallet of 150 sheets
Your Rating