Schluter BARA-ESOT

Schluter BARA-ESOT (E) Stainless Steel (V2A) H=110mm L=2.5 Mtr(s)

Schluter BARA-ESOT

Schluter BARA-ESOT (E) Stainless Steel (V2A)

Schluter BARA-ESOT (E) Stainless Steel (V2A) H=60mm L=2.5 Mtr(s)

Schlüter®-BARA-ESOT is an angular support profile for bonding skirting Tiles to non-load-bearing substrates. These substrates include zinc-flashing or bituminous waterproofing layers which are used at Wall/ Floor transitions on balconies and terraces. A foam insulation strip, cut in the same width as the skirting Tile, is placed between the vertical leg of the profile and the Wall.
£31.03
Availability: In stock
SKU
ESOT60
Schlüter®-BARA-ESOT is an angular support profile for bonding skirting Tiles to non-load-bearing substrates. These substrates include zinc-flashing or bituminous waterproofing layers which are used at Wall/ Floor transitions on balconies and terraces. A foam insulation strip, cut in the same width as the skirting Tile, is placed between the vertical leg of the profile and the Wall. The trapezoid-perforated anchoring leg of Schlüter®-BARA-ESOT is embedded in the Tile Adhesive and covered by the Floor Tile. The special perforation of the vertical leg positions Schlüter®-BARA-ESOT approximately 1 mm from the insulating strip. First, dry-Set mortar is applied to the skirting Tile. The Tile is then Set against the vertical leg of the profile. The dry-Set mortar penetrated the perforations of the skirting support and thus locked into the special structure of the profile. A joint of approximately 5 mm should be left between the skirting and the Floor Tile. The joint is then filled completely with Grout. Finally, a Flexible joint on top of the base Tile is constructed using an appropriate sealing compound.
More Information
Color E Stainless Steel (V2A)
SKU ESOT60
Brand Schluter

File Downloads

pdf
(Size: 375.3 KB)
Write Your Own Review
You're reviewing:Schluter BARA-ESOT (E) Stainless Steel (V2A) H=60mm L=2.5 Mtr(s)
Your Rating