Designed to cover the exposed edges of balconies
How to install
Place the horizontal leg of the product flush on the concrete slab.
Depending on the properties of the exposed perimeters, it can be adhered with the adhesive Schlüter-KERDI-FIX or attached mechanically.
Note:
Substrates on which the profile is to be installed needs to be evaluated for their stability.
Prior to the use of KERDI-FIX, all components of the surface that may weaken the bond must be removed.
If that is not an option, use anchors and screws for additional mechanical attachment.
If screw attachment is necessary, position the screws in the top area of the profile so they can then be covered with an edge profile of the Schlüter-BARA product family.
To avoid vibrations in the screw-attached option, additional adhesion is recommended in the lower section.
Select Part | N/A |
---|---|
Select Part | N/A |
Product Code | BARA-FAP |
Power Options | N/A |
Manufacturer | Schluter |