Schluter BARA-R-V Connector (PG) Pastel Grey H=70mm
Schlüter®-BARA-R is a T-shaped edging profile for the exposed edges of Floor assemblies on balconies and terraces. The profile provides a neat edge appearance while protecting the exposed edges of the Floor surface against weathering and corrosion.
Availability: In stock
Height of 50mm has an H1 height of 29mm Height of 70mm has an H1 height of 44mm During the application of the screed, the trapezoid-perforated anchoring leg of Schlüter®-BARA-R is solidly embedded in the mortar bed while the upper edge of the profile is used to screed the mortar bed to the appropriate height. Install Schlüter®- TROBA-PLUS as surface drainage between the waterproofing layer and the mortar bed in order to prevent penetrating water from collecting in the screed layer. If Schlüter®-DITRA 25 is to be installed, the screed is levelled 3 mm below the top of the profile. Schlüter®-DITRA 25 uncouples the Tile covering from the screed and neutralises stresses caused by differential movement, primarily due to temperature fluctuations, between the screed and the Tile. In addition, Schlüter®-DITRA 25 in conjunction with the Tile covering creates a bonded surfacewaterproof layer.
|Color||PG Pastel Grey|
Write Your Own Review