Schluter BARA-RAM External Corner 135°
Schlüter®-BARA-RAM is a Finishing profile with an integrated drip lip for the exposed edges of Floor assemblies on balconies and terraces. The profile is installed during the application of the sloping screed and can be used as a screeding guide.
- More Information
- Datasheets 1
- Delivery Information
** Note: Schluter Bara- Ram can be used with with the Barin gutter system but you will need to drill holes to fit. *** Schlüter®-BARA-RAM is a Finishing profile with an integrated drip lip for the exposed edges of Floor assemblies on balconies and terraces. The profile is installed during the application of the sloping screed and can be used as a screeding guide. The projecting bonding flange is recessed to allow for the use of the Schlüter®-RONDEC or Schlüter®-JOLLY protective edge profiles, which are available in the same colours as the balcony edging profile. The trapezoid perforated anchoring leg of Schlüter®-BARA-RAM is placed on a thin layer of fresh mortar and adjusted to the proper height and alignment. Then, additional fresh mortar is firmly packed over the anchoring leg. To provide for the subsequent installation of Schlüter®-DITRA 25, screed the packed mortar 3 mm below the upper edge of the profile. Schlüter®-DITRA 25 can be installed as a waterproofing membrane as soon as the screed is ready for foot traffic. Trowel applied waterproof membranes from other manufacturers or waterproofing layers according to DIN 18195-5, can be utilised as well. In each of these applications, the sloping screed is placed flush with the upper edge of Schlüter®-BARA-RAM.
Write Your Own Review
Please note that we have an order cut off order time of 12:30pm on all Next Day deliveries. If ordered after this time your product will be still be shipped on a next day delivery, but on the following day. If in doubt please contact the store.