Schluter BARA-RKKE Internal Corner (GM) Grey Metallic H=23mm
Schlüter®-BARA-RKK is a T-shaped Finishing profiles with a short drip lip for the exposed edges of covering assemblies on balconies and terraces with Finished sloped screeds.
Availability: In stock
Schlüter®-BARA-RKK/-RKKE are T-shaped Finishing profiles with a short drip lip for the exposed edges of covering assemblies on balconies and terraces with Finished sloped screeds. Schlüter®-BARA-RKK is designed for assemblies with the bonded uncoupling membrane Schlüter®-DITRA 25. Its closed outer edge gives the exterior perimeter of Tiled areas a neat appearance. Schlüter®-BARA-RKKE is Particularly suited for assemblies with the bonded drainage mat Schlüter®-DITRA-DRAIN. Its perforated outer edge gives the exterior perimeter of Tiled areas a neat appearance. Furthermore, the profile covers the exposed edges of the bonded drainage mat Schlüter®-DITRA-DRAIN, which is installed below the covering. The crosssection of the profile openings is sufficiently Large to guarantee drainage and ventilation. Schlüter®-BARA-RKK/-RKKE creates a neat Finish and protects the exposed edges from weather influences and corrosion. The trapezoid perforated anchoring leg of the profile is attached to the exposed edges with a dry-Set Tile Adhesive. The bonded waterproofing mat Schlüter®-KERDI may be installed over the perforated anchoring leg and the Adhesive flange of the profile, using the sealing Adhesive Schlüter®- KERDI-COLL. If trowel-applied bonded waterproofing products are used, the installation instructions of the manufacturer must be observed. Thanks to the short design of the drip lip, Schlüter®-BARA-RKK/-RKKE is Particularly well suited for balconies and terraces with railings mounted on the front side.
|Colour||GM Grey Metallic|
Write Your Own Review