Schluter DILEX-EK Internal Corner Movement Joint

Schluter DILEX EK Internal Movement Profile (Select Colour, Height and Width)

Schluter DILEX-HK Cove Movement Joint

Schluter DILEX HK Cove Movement Joint (Select Colour and Parts Required)

Schluter DILEX EKE Internal Movement Joint (Select Colour, Height and Width)

As low as £17.57

Schlüter DILEX-EKE is a flexible single piece corner profile for interior Wall corners or wall/floor transitions.

U= Height in mm

O=Width in mm See Technical Picture

Length 2.5M

Colours Available

BW Bright White, G Grey, GS Black

HB Light Beige, SP Soft Peach, PG Pastel Grey

Availability: In stock
Product Code

Schlüter®-DILEX-EKE and Schlüter®- DILEX-EF are single-Part corner profiles for interior Wall corners. If the Floor covering is not constructed as a floating screed, Schlüter®-DILEX-EKE and Schlüter®- DILEX-EF may also be used as Flexible Floor/ Wall transitions. The trapezoid perforated, lateral anchoring legs are firmly embedded in the Adhesive below the Tile covering. In the case of Schlüter®-DILEX-EKE, one of the anchoring legs forms a chamber for inserting cut Tile edges. In the case of Schlüter®- DILEX-EF, the Tiles abut the profile from both sides, leaving a uniform joint Space. The Tile surface can be either flush with the profile edge or up to approx. 2 mm lower, which allows for choosing a variety of Tile thicknesses. Completely fill the joint between the profile and the Tiles with Grout (or Partly with Tile Adhesive during installation). The visible movement zone is only 5 mm wide. It must be verified for individual projects whether this 5 mm zone is sufficient for the expected movements.

More Information
Select Part N/A
Select Part N/A
Product Code DILEX-EKE
Manufacturer Schluter
(Size: 372.6 KB)