Schluter DILEX MOP Movement Joint (See Options)

Schlüter-DILEX-MOP is a profile with sturdy serrated lateral sections made of recycled rigid PVC and a centre movement zone made of soft PVC. The profile is available in four different heights and is used as a movement joint in coverings made of pavers, ceramic tiles, and natural or man-made stone.
The DILEX-MOP 25 is well suited for coverings that are set using the vibration method with medium-bed mortar.
DILEX-MOP in heights of 35 - 65 mm is used for coverings that are set in a mortar bed. The DILEX-MOP separates individual installation segments in the covering and absorbs minor compressive stresses in the soft PVC movement zone. Since the profile does not have lateral frictional anchoring, it is not suited for absorbing any tensile stresses that may be present.
The lateral sections of the profile are made of rigid PVC and protect the edges of the adjacent covering from mechanical stresses caused by conveyor vehicles, subject to the limited mechanical suitability of PVC profiles in edge protection.
The lateral profile sections are made of environmentally-friendly recycled rigid PVC and may vary slightly in colour. The profiles are therefore primarily intended for industrial applications.
DILEX-MOP may also be tapped into saw-cut joints or inserted into wider joint cuts, e.g. as part of renovation projects. The remaining joint space between the tile and the profile must be filled completely with grout or epoxy.