Schluter DITRA-HEAT Remote Sensor

Schluter Ditra Heat Spare Remote Sensor

Schluter Ditra Heat Electric Underfloor Heating Cables (See Options)

As low as £71.34

Ditra Heat electrical heating cable

  • Easy to install
  • Suitable for wet rooms
  • Wall and floor application
  • Internal use only
  • 20 sizes available from:
    0.4m2 to 22.7m2
  • Colour: Black
  • Use with: Ditra Heat matting
  • Floors: 136 wm2 use a 3 stud spacing
  • Walls: 200wm2 use a 2 stud spacing


Availability: In stock
Product Code
Schlüter Ditra Heat electrical heating cable for the Ditra heat system.
The electrical heating cable is installed in the uncoupling Ditra Heat mat.
Used for applications in floor and wall assemblies.
It is available in lengths from 4 to 244 metres.
Since our systems are certified for waterproofing, the heating cables are approved for use in bathrooms and wetrooms.
Selecting the correct heating cable:
The drop down menu indicates the heated space in m² and not the room size.
To determine the heated space, deduct unheated zones such as perimeter areas and storage space from the room size.
Note: Heating cables must not be shortened.
Heating cable installation:
For installation in floor areas, heating cables can be installed immediately after adhering the uncoupling mat DITRA-HEAT, using a float or roller.
For wall installation, the heating cables are installed once an adequate adhesive bond has been reached.
Heating cables must never overlap or touch each other.
Floor areas:
The installation spacing in the floor area must be at least 9 cm (around every third stud – the equivalent of 136 W/m²)
Wall areas:
Depending on the desired surface temperature and the required heat output either
6 cm (around every second stud – the equivalent of 200 W/m²)
9 cm (around every third stud – the equivalent of 136 W/m²)

More Information
Select Part N/A
Select Part N/A
Colour N/A
Power Options N/A
Manufacturer Schluter