Schluter Finec ES 3 Way Corner Set (Select Height and Colour)

When creating a 3 way external corner with the stainless steel profiles Schlüter®-FINEC-E, in which the top two profiles were fitted at an angle of 45°, the adjoining lower profile must be cut to size. In that case, the trapezoid perforated anchoring leg must be cut straight up to the spacer by a minimum measure of x-Depending on the profile size – and the joint spacer including visible area must be chamfered by 45° PictureFigure E 

When creating a 3 way external corner with the aluminium profiles Schlüter®- FINEC-AE /-AC /-TS, in which the top two profiles were fitted at an angle of 45°, the adjoining lower profile must be cut to size. In that case, the trapezoid perforated anchoring leg, including joint spacer, must be cut straight to the visible area by a minimum measure of x – depending on the profile size –Pictutre AE/AC/TS.