Schluter Kerdi Line H50 G2 Linear Drain With Odour Trap (See Options)

Schluter Kerdi Line H50 G2 Linear Drain With Odour Trap (See Options)

Schluter Kerdi Line H Linear Drain with Odour Trap (See Options)

As low as £264.38

KERDI-LINE-H horizontal drain and integrated odour trap

  • 14 lengths to choose from
  • 40 or 50mm pipes
  • Easy access for cleaning
  • Suitable for:Timber or solid floors
  • Assembly Heights:
    (40 mm pipe) 78 mm / (50 mm pipe) 97 mm
  • Capacity: 40mm 0.5l/s / 50mm 0.6l/s
  • Included:
    Corner seal (for lateral wall connection)
    Two-part odour trap
    Channel body with sealing collar
    Drain body
    Drain pipe
    Channel Support
  • Kerdi line grates sold separately (see below)
Availability: In stock
Product Code
KLH-select

How to install this product
1 Install the channel support on a level and plumbed substrate.
In case of uneven surfaces or for height adjustment, you can also position the drain body precisely over adequately spaced spots of mortar or on a full levelling layer.
In case of wall installation, align the channel body to match the thickness of the wall covering.
For intermediate installation, use the supplied filling strip to symmetrically align the channel support.
2 Insert the channel body into the channel support - together with a drain pipe that is cut to the corresponding size - then connect the drain pipe to the existing drainage system of the building.
Perform a water tightness test.
3 Next, install the sloped tray Schlüter-KERDI-SHOWER-LT/ -LTS, abutting the precisely aligned drainage channel
The sloped tray must be installed at the proper height, flush with the upper edge of the channel support over a sufficiently load bearing level layer
As an alternative, you can install a sloped screed at the correct height, flush with the upper edge of the channel support.
4 To attach the KERDI collar, apply the sealing adhesive KERDI-COLL-L to the adjoining waterproofing assembly.
The curing time of the adhesive must be observed.
Create the wall connections with KERDI-KEBA sealing tapes that are adhered with KERDI-COLL-L.

More Information
Product Code KLH-select
Manufacturer Schluter
pdf
(Size: 4.8 MB)