Schluter Kerdi Line H50 G2 Linear Drain With Odour Trap (See Options)

How to install this product
1 To achieve the minimum assembly height of 120 mm, shorten the adapter (max. insertion depth 90 mm) up to a minimum insertion depth of 15 mm
2 Reattach the adapter to the channel body and tighten the screws
3 Set the drain body onto the adapter and push it in place
4 Apply thin-bed tile adhesive to create a level substrate in the area of the channel support. Set the channel body with the channel support onto the drain body and push it in place. Use spots of mortar for any height adjustment that may be needed. Secure the drain body in such a way that the adapter cannot slide off. For wall installation, align the channel body depending on the distance from the wall and the thickness of the wall covering
5 Attach and align the drain pipe of the existing drainage system
6 Then install the sloped screed (2%) of the shower surface, with suitable insulation if applicable
7 Then adhere DITRA or DITRA-HEAT with thin bed tile adhesive
8 Seal the abutting joints with Kerdi Keba fixed with Kerdi Coll L
9 Attach the Kerdi collar also with Kerdi coll L adhesive.