Schluter Kerdi Line V50 G2 Liner Drain With Odour Trap (See Options)

Schluter Kerdi Line V50 G2 Liner Drain With Odour Trap (See Options)

Schluter Kerdi Line VS50 Linear Drain Without Odour Trap (See Options)

Schluter Kerdi Line VS50 Linear Drain Without Odour Trap (See Options)

Schluter Kerdi Line V50 Linear Drain With Odour Trap (See Options)

As low as £235.03

KERDI-LINE-V vertical drain and integrated odour trap

  • 14 lengths to choose from
  • 50mm pipe
  • Easy access for cleaning
  • Suitable for: Solid and timber floors
  • Installation Height: 24mm
  • Water trap height: 30mm
  • Capacity: 0.8l/s
  • Width of cover inc frame: 74mm
  • Included:
    Corner seal (for lateral wall connection)
    Two-part odour trap
    Channel body with sealing collar
    Drain body
    Channel Support
  • Kerdi line grates sold separately (see below)
Availability: In stock
Product Code
KLV50GE

How to install this product
1 Install the channel support on a level and plumbed substrate.
In case of uneven surfaces or for height adjustment, you can also precisely position the channel support on a levelling layer.
In case of wall installation, align the channel body to match the thickness of the wall covering.
For intermediate installation, use the supplied filling strip to symmetrically align the channel support.
2 Insert the channel body into the channel support - together with a drain pipe that is cut to the corresponding size - then connect the drain pipe to the existing drainage system of the building. Perform a water tightness test
3 Next, install the sloped tray KERDI-SHOWER-LT/ -LTS, abutting the precisely aligned drainage channel KERDI-LINE-V. The sloped tray must be installed at the proper height, flush with the upper edge of the channel support (see product data sheet 8.8). As an alternative, you can install a sloped screed at the correct height, flush with the upper edge of the channel support.
4 To attach the KERDI collar, apply the sealing adhesive KERDI-COLL-L to the adjoining waterproofing assembly.

More Information
Colour EB Brushed Stainless Steel (V4A)
Product Code KLV50GE
Manufacturer Schluter
pdf
(Size: 4.8 MB)