Schluter Sloped Shower Profiles (See Options)

Schluter Sloped Shower Profiles (See Options)

Schluter Kerdi LT Shower Trays For Centre Linear Drain Install (See Options)

Schluter Kerdi LT Shower Trays For Centre Linear Drain Install (See Options)

Schluter Kerdi LTS Shower Trays For Perimeter Linear Drains (See Options)

As low as £151.66

Schlüter KERDI-SHOWER-LTS sloped shower trays

  • Ideal for linear drains against the wall
  • Cut to size with a utility knife if required
  • Compression-resistant
  • Waterproof
  • Easy to install
  • Ready to tile
    Use with:
    Kerdi Line H horizontal drains
    Kerdi Line V verticle exit drains
  • Note: 
    Drop down menu drainage is always situated on the first listed measurment
Availability: In stock
Product Code
KSLS

How to install
To install KERDI-LINE-H with a horizontal drain and odour trap, start by precisely fitting the channel support and channel body. The components can be adhered with thin-bed tile adhesive, provided the substrate is level and height-adjusted.
Properly install the levelling layer (compressive strength >= 0.3 N/mm²) on the weight-bearing substrate. Make sure that the upper edge of the levelling layer is situated approx. 24 mm below the linear drainage. If using bound fillings, it may be advisable to apply spackle prior to installing the tray, depending on the condition of the substrate. The respective manufacturer’s specifications must be observed.
Note:
If impact sound insulation is required, install suitable impact sound insulation underneath the levelling layer and KERDI-LINE-H (e.g. KERDI-LINE-SR) together with the corresponding edge strips.
To install the vertical linear drainage KERDI-LINE-V, adhere the sloped tray directly on a suitable substrate at the appropriate height.
Notch the sloped tray at the pre-marked cutting grooves with a utility knife, depending on the selected dimension of KERDI-LINE.
Then embed the sloped tray fully in thin-bed tile adhesive to be flush with the KERDI-LINE channel support. Slide the small groove of the adjoining sloped tray surface laterally below the flange.
Now attach the KERDI collar that is pre-adhered at the linear drainage to the adjoining waterproofing of the sloped tray, using the sealing adhesive Schlüter-KERDI-COLL

More Information
Select Part N/A
Select Part N/A
Colour N/A
Product Code KSLS
Power Options N/A
Manufacturer Schluter